-
Better Products, Better Results
TAG Chemicals
LAMINATES
HARDENER : 340/341 SERIES
1
- Latent hardener for Melamine-formaldehyde, Urea-formaldehyde impregnation resins with long pot-life and high curing activity.
- CA-340 does not contain chloride ions.
WETTING AGENT : WT-320
2
- Wetting agent for Melamine-formaldehyde, Urea formaldehyde resins and impregnation of decor papers which are difficult to process.
- Effectively reduces the surface tension of the resin allowing for better penetration in the paper.
RELEASE AGENT : RA-330
3
- Special internal release agent that can be added directly to any aqueous resin system (Melamine, Phenolic or Urea aqueous resin mixture), Used for high pressure and low pressure impregnation.
ANTIBLOCK AGENT : AB-310 SERIES
4
- Well suited for the decorative coating of plane carrier materials (e.g. chip boards, fiber boards, sheets on bases of phenolic resins a.s.o.).
- The impregnated decorative papers can be used in the short cycle process as well as in the continuous production of high-pressure laminates Also usable for post forming systems.
GLOSS AGENT : GP-355 SERIES
5
- Additive allows to achieve a higher gloss level and better flow properties of the resin.
- Ideal additive for melamine-formaldehyde, urea-formaldehyde resins and impregnation of decor papers which are difficult to process.
- Effectively reduces the surface tension of the resin allowing for better penetration in the paper and will give a higher flexibility.
MODIFIER : MF-353 SERIES
6
- MF-353 is a waterbased modifier which is based on a combination of Acrylat Resin, Glycols and Amines.
- Reacts well with melamine-formaldehyde resins and combinations of melamine-formaldehyde resins with urea-formaldehyde resins.
- MF-353 is especially suitable for resins which are used for HP-, CPL- and Contilam-process.
DEFOAMER : AF-707 SERIES07
7
- Water based defoamer which shows excellent results at low dosage. Does not contain alcohols or silicones.
