Products for FRP (Composites / Headliners / Brake pads / Glass wool / Stone wool / Pipes etc.)

Additive 109 : is a very efficient internal wetting agent formulated for polyester- and acrylic resins. Additive 109 is free of silicones. Due to its chemical consistency Additive 109 will give a better flow and distribution of the resin / gel coat. Additive 109 will help to avoid to create "fish eyes and stripes" on mould surfaces caused by semi permanent mould release agents.

Application field: Internal wetting agent for polyester and acrylic resins


Additive G-160: is a very efficient internal release agent with lubricant properties, formulated for polyester- and acrylic resins. G-160 is free of silicones. Due to its chemical consistency G-160 allows for post- treatment after release such as painting or foaming on top of the created surface without any additional treatment such as sanding.

Application field: Polyester- and Acrylic Resins

Additive G-161X: is a very efficient internal release agent with lubricant properties, formulated for polyester- epoxy and acrylic resins. G-161X is free of silicones. Due to its chemical consistency G-161X allows for post- treatment after release such as painting or foaming on top of the created surface without any additional treatment such as sanding.

Application field: Polyester, Epoxy and Acrylic resins

Additive G-172: is a very efficient internal release agent with lubricant properties, formulated for epoxy- resins. G-172 is free of silicones. Due to its chemical consistency G-172 allows for post- treatment after release such as painting or foaming on top of the created surface without any additional treatment such as sanding

Application field: Epoxy resins.

Additive G-176: is a very efficient internal release agent with lubricant properties, formulated for phenolic- resins. G-176 is free of silicones. Due to its chemical consistency G-176 allows for post- treatment after release such as painting or foaming on top of the created surface without any additional treatment such as sanding.

Application field: Phenolic resins

DexCoat 1: is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. DexCoat 1 is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides an extremely durable film capable of giving many releases per application and will not contaminate the released

Application field : Epoxy, polyester, vinyl ester, phenolic and other thermosetting resins

DexCoat 8: is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. DexCoat 8 is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate the released surface.

Application field: Epoxy, polyester, vinyl ester, phenolic and other thermosetting resins

DexSeal: is designed as a mould release agent for epoxy, polyester, vinyl ester, phenolic and other thermosetting resins. DexSeal is an advanced polymeric resin in a non- chlorinated organic solvent blend. It provides a durable film capable of giving many releases per application and will not contaminate

Application field: Epoxy, polyester, vinyl ester, phenolic and other thermosetting resins

Hard Wax 103: is designed as a mould release agent for polyester, vinyl ester, and other thermosetting resins. Hard Wax 103 is a mix of special waxes in past form. It provides a durable film capable of giving many releases per application.

Application field: Polyester, vinyl ester and other thermosetting resins

PVA Clear Plus: is liquid and ready to use. The release system becomes functional after cure. The release film is micro thin and stable until 250°C.

Application field: FRP, Polymer Concrete

Release Agent TM-111 SVC: is designed as a mould release agent for thermosetting resins. TM-111 SVC is a mix of special waxes and synthetic resins in solvents. It provides a durable film capable of giving excellent releases and lubrications per application. TM-111 SVC is especially suitable for the production of polymer concrete and concrete parts.

Application field: Thermosetting resins and Polymer concrete and concrete parts.